Timbabuild EWS Epoxy Wood Stabiliser/Primer
£18.75 (exc VAT) per Set
Timbabuild EWS Epoxy Wood Stabiliser/Primer is a specially designed two-part low viscosity, solvent free, resin primer which is designed to strengthen weakened wood fibres by penetrating deep into the wood. It is designed to be used as a primer in conjunction with the Epoxy Rapid Cure (ERC10) or Epoxy High Build (EHB60) systems. Once the damaged, decayed and discoloured wood has been removed by use of a suitable cutter tool such as a router or chisel, then the area to be treated is lightly sanded to ensure excellent adhesion. The moisture content of the wood should be no greater than 18% (check using a standard moisture meter) and damp wood should be allowed to dry naturally, or by way of a hot air gun. The two components are mixed manually into a separate container, and thoroughly agitated for one minute. The 2:1 mixing ratio should be strictly observed. EWS should be applied using a standard brush and left to cure for at least 20 minutes.
BENEFITS:
- Solvent Free
- Excellent Penetration due to the Low Viscosity
- Pre-measured to Volume 2:1 ratio to ensure accurate mix
- High Strength & Durability
- Fast and Simple to Use, Easy to Clean and Store
- 2:1 mixing ratio
RECOMMENDED FOR:
- Suitable for indoors and outdoors
- Used with both the ERC10 & EHB60 systems
- Used to create a better bond between the resin and substrate
- Stabilises the wood
| Colour | Clear |
|---|---|
| Size | 300ml |
| Brand | Timbabuild |
| MPN | TIM4711 |
| EAN | 5018567135030 |
| Box Quantity | 12 |
